“זוג רמקולים חיצוניים פיור אקוסטיקס Pure acoustics px465” נוסף לסל הקניות. מעבר לסל הקניות
מערכת מושלמת לגינה ולבריכה ג’אמו Jamo jl4810/jda500
סט עוצמתי ומושלם לגינה | הכולל מגבר חזק ו-8 רמקולים קטנים המונחים על דוקרנים באדמה וסאב וופר “10 שקוע באדמה | הסט עמיד בתנאי מזג אוויר קיצוניים במיוחד | גריל אלומיניום לכל הרמקולים | מותאם לחללים גדולים
Overview: The Jamo JL-4810 Landscape System is an all-in-one, high performance outdoor audio speaker set that includes eight JL-4 satellite speakers and a JL-10SW subwoofer, all designed to blend seamlessly into your outdoor area while providing clear, powerful sound. The speaker system can be run in either a 70/100 volt or 8 ohm configuration and are most efficient when used with the Jamo JDA-500 amplifier. This amp includes built-in DSP presets which provide the most optimized power and acoustic performance for the JL-4810 speaker system.
JL-4 Satellites: The included JL-4 outdoor speakers consist of a 4″ long-throw aluminum driver housed in a UV-resistant fiberglass filled ABS cabinet with an aluminum grill. The speakers can deliver detailed, dynamic sound while providing all-weather capability with an IP45 outdoor rating. They can be run in either an 8 ohm configuration or a 70 volt system providing 25 watts of output power with its built-in transformer. The included JGS-10 ground stakes use an easy twist-lock system for attaching to the speakers and include an M2 set-screw to keep them locked in place. The ground stakes allow the speakers to sit at ground level, making them easier to conceal and blend in with the environment.
JL-10SW Subwoofer: The JL-10SW landscape subwoofer uses the same high performance acoustic design as Jamo’s indoor products, providing powerful, detailed sound for your outdoor living space. The subwoofer is comprised of a long-throw 10″ IMG woofer housed in a high-impact polyethylene enclosure with a rustproof aluminum top-cap. It’s half-burial design allows it to have the large enclosure necessary for low extension, yet be easily concealed. Like the JL-4 satellites, the subwoofer also carries an IP45 outdoor rating. The JL-10SW can be wired conventionally, in either a 4 ohm mono or 8 ohm stereo mode, or it can be used in a 70/100 volt system. Since transformers severely limit a subwoofer’s low frequency capabilities, the JL-10SW uses a transformerless dual voice-coil design for 70/100 volt operation.
Specifications:
Dimensions:
JL-4 Satellites: Diameter – 4.08″, Length – 5.67″, Height – 5.22″ (above ground level when installed) / 6.0″ (to bottom of attached base)
JL-10SW: Diameter – 12.38″ (Body) / 16.125″ (Top), Height – 21.88″, Height (above ground when installed) – approx. 12.0″
JGS-10 Ground Stakes: Diameter (top) – 2.38″, Length – 10.50″
Frequency Response: 39Hz – 20kHz
System Sensitivity: 89dB (2.83V @ 1 m)
Power Handling:
JL-4: Satin gun metal paint
JL-10SW: Gloss metallic gun metal
Weight:
JL-4: 5.0 lbs.
JL-10SW: 35.0 lbs.
Amplifier Features
Overview: The Jamo JDA-500 is a 4 channel amplifier offering 125 watts of class G/H power per channel for a 500 watt total. Designed specifically to drive Jamo’s JL-4810S Landscape Speaker System, the JDA-500 can be wired for standard 4/8 ohm operation or for 70/100 volt distributed line applications. It’s housed in a durable 19″ case that’s 1 rack unit high, making it perfect for rack mounting.
Wiring: The JDA-500 features 4 input channels that can be fully matrixed to any of the 4 output channels. Inputs include 4 Unbalanced jacks (RCA) as well as four Balanced 3-pin Phoenix (Euroblock) connectors. Four unbalanced RCA Line Outs (pass-thru) are provided for daisy-chaining the input signals to multiple amps. The 4 speaker outputs are grouped onto two 4-pin Phoenix connectors, each with two channels, that can accommodate up to 12 ga. wire. The speaker outputs can be wired for 4/8 ohm or 70/100 volt configurations.
DSP: Configuration of the JDA-500 amp is all done through a web-based, easy to use menu that can be accessed either from a computer plugged into the rear-panel Ethernet (RJ-45) jack, or from a computer, tablet, or smartphone on a Wi-Fi network, as long as the amplifier has an Ethernet connection directly to the network’s router (The JDA-500 has no built-in Wi-Fi capability). Along with I/O configuration, the DSP offers password protected Channel Assignments, Gain settings, EQ, and Limiting. The DSP also provides presets for almost every Jamo speaker on the market, giving optimized acoustic performance and power handling to these speakers with a single mouse-click.
Indicators: The amplifier’s front panel includes a strip of 5 LED indicators. The Power LED will light solid blue when the unit is on, solid red when in standby mode, and off when the amp is powered off. A bank of 4 LEDs display the status of each of the input channels:
Off: No signal is detected.
Green: Signal detected.
Red: Signal is clipping.
Flashing Red: Amp is in protection mode, including thermal and overload protection.
Specifications:
Amplifier Type: High efficiency class G/H
Amplifier Power: 4 x 125 watts per channel, 500 watts total power
Inputs:
Balanced: 4 Phoenix line level
Unbalanced: 4 x RCA line level
Outputs:
Speaker: Two 4-pin Phoenix connectors
Pass-Thru: 4 RCA line level
Input Sensitivity: 750 mV balanced, 0 dBU
Input Impedance: Balanced 40k
THD: <1% @ rated output
Signal to Noise: -100 dB below rated power
Materials:
Front Face: ABS plastic
Case: Machine formed steel
Dimensions: Width 19.0″, Height 1.75″, Depth 18.0″ (w/power cord)
Weight: 15 lbs.
פרטים טכניים
סט עוצמתי ומושלם לגינה הכולל מגבר חזק ו-8 רמקולים קטנים המונחים על דוקרנים באדמה וסאב וופר “10 שקוע באדמה הסט עמיד בתנאי מזג אוויר קיצוניים במיוחד גריל אלומיניום לכל הרמקולים מותאם לחללים גדולים
Product highlights:all-in-one outdoor sound system with eight stake-mount speakers, partial-burial subwoofer, and power amplifier8 JL-4 Satellite Speakers:4″ long-throw aluminum full-range driverweather-resistant, UV-resistant ABS enclosure with aluminum grillemount on included ground stakes for a variety of placement optionsfrequency response 115-20,000 Hz (±3dB)5-1/4″W x 4-1/8″H x 5-11/16″D eachweight: 5 lbs. eachJL-10SW Subwoofer:10″ long-throw IMG wooferheavy-duty polyethylene cabinet with rustproof aluminum canopydesigned for partial burialfrequency response: 47-103 Hz (±3dB)16-1/8″ diameter x 21-7/8” heightweight: 35 lbs.JDA-500 Amplifier:4 x 125-watt amplifierClass G/H designconnections:four balanced inputs with 12-pin Phoenix-style Euroblockfour unbalanced RCA line-level inputsfour speaker-level outputs with 8-pin Phoenix-style Euroblockfour unbalanced RCA line-level outputs for daisy-chaining multiple amps6-pin Phoenix-style Euroblock service portRJ-45 Ethernet port for connecting to a laptop or routerbuilt-in digital signal processing (DSP) is factory preconfigured for this specific speaker systemaccess DSP wirelessly with a tablet, smartphone, or computer (amp must be connected to your wireless router via Ethernet)